module for Arduino NRF24L01 2.4GHz Wireless Transceiver Module
Specifications:
- NRF24L01 is a universal ISM band monolithic transceiver chip
works in the 2.4-2.5GHz
- Wireless transceiver including: Frequency generator, enhanced
type, SchockBurstTM, mode controller, power amplifier, crystal
amplifier, modulator, demodulator
- The output power channel selection and protocol settings can be
set extremely low current consumption, through the SPI interface
- As the transmit mode, the transmit power is 6dBm, the current is
9.0mA, the accepted mode current is 12.3mA, the current consumption
of the power-down mode and standby mode are lower
- Built-in 2.4GHz antenna, supports up to six channels of data
reception
- Size: 15 x 29mm (including antenna)
- Low operating voltage: 1.9-3.6V
- 125 channels, multi-point communication and frequency hopping to
meet the communication needs
- High Rate: 2Mbps, as air transmission time is very short, greatly
reducing collision phenomena in wireless transmission (air transfer
rate of software setting: 1Mbps or 2Mbps)
- Low power consumption: When the answer mode communication, fast
air transmission and start-up time, which greatly reduces the
current consumption
- Low application cost: NRF24L01 integrated part of all high-speed
signal processing related to RF protocol, such as: automatic
retransmission of lost packets and automatically generate response
signals, etc.
- NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
- Internal FIFO compatible with a variety of microprocessor
interface, micro-controller is convenient
- Standard pin Dip2.54MM spacing interface for embedded
applications
- Packing list:
- 1 x NRF24L01 wireless transceiver module
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment
