1A Lithium Battery Charging module for Arduino , 4.5V - 5.5V Battery Charge Plate
1a lithium battery charge plate charge module lithium battery
charger
Specifications:
1A dedicated lithium battery charging pad, charging module, lithium
battery charger
1, Module Name: lithium battery charging plate
2, Charging current: 1A adjustable
3, Input voltage: 4.5V-5.5V
4, Charging indicator: red charging green full charge
5, Operating Temperature: -10 °C to +85 °C
6, Weight: 10g
7, Charging method: linear charge 1%
8, Charging accuracy: 1.5%
9, Full charge voltage: 4.2V
10, Input Interface: mini USB
11, Can reverse: can not reverse
12, External dimensions: 25 * 19 * 10mm
RPROG (k) | IBAT (mA) |
30 | 50 |
20 | 70 |
10 | 130 |
5 | 250 |
4 | 300 |
3 | 400 |
2 | 580 |
1.66 | 690 |
1.5 | 780 |
1.33 | 900 |
1.2 | 1000 |
Description / Note
1 test current ammeter can only be connected in series at the the
5V input end of the charging plate.
2. Charging current best 0.37C of the battery capacity is the
capacity of 0.37 times, such as 1000mAH battery charging current
400 so that enough. Over large chargingspeed effect poor, rushed
the finished battery voltage out more!
The charging connector wires can not be too small and too long.
Such connection resistance. Too thin, then rushed the finished
battery voltage out more.
4 best contact connection with the battery is good. Or punch the
finished battery voltage out more.
5. 5V input voltage is high, such as 5.2 or even 5.5 will result in
insufficient charging current 1000mA, this is normal. High voltage
chip the fever will automatically reduce thecharge current, and not
to chip burned. Chip in about 60 degrees work fever is normal.
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment
